Genpacs-MTU Line

GENPACS-MTU LINE - GENERATOR FROM 300KVA TO 2,500KVA

GENPACS MTU GM550S 500KVA 3

GENPACS  MTU GM550S

For more detail, please click below (Catalogue Genpacs-MTU Line)

Engine

ENGINE: MTU 10V1600G20F

  • Diesel 4-cycle, Direct Injection, Electric starting with 24VDC battery, c/w 24VDC charging alternator.
  • Cooling by radiator and self-driven fan
  • Easy Replaceable Filters (Oil, Fuel and Air)
3239101 MTU Gendrive spec 1600G20F
4016 61TRG3 for 2025-2500KVA GENPACS
ENGINE DATA
  • Brand/Made
MTU – MADE IN GERMANY
  • Model
10V1600G20F
  • Number of Cylinder
10V
  • Total Displacement (l)
17.5
  • Bore x Stroke (mm)
122x150
  • Rated Speed (RPM)
1500
  • Standby Power  (KWm)
493
  • Governor Type
Auto Electronic ECU8
  • Induction type
Turbo Charged
  • Frequency/Speed Variation
    Fuel System
+/- 0.25%
  • Fuel Consumption at 100% load (l/h)
107
  • Fuel Consumption at 75% load (l/h)
 85
  • Fuel Day Tank Capacity at base Frame (l)
800
Lubricant Capacity (l) 60.5

Alternators

ALTERNATOR: MECC ALTE  ECO 40-3S/4, LEROYSOMER LSA47.2M7, SINCRO SK355MS

  • Synchronous, Brushless, IP23, Insulation Class H.
  • Self auto Excited, Voltage Control by AVR with variation at 0.25  to 0.5%.
alternatore mecc lsa 472 SK 355
MECC ALTE  ECO 40-3S/4 LEROYSOMER LSA47.2M7 SINCRO SK355MS

 

ALTERNATOR DATA
  • Brand

MECC ALTE-LEROYSOMER-SINCRO

  • Model
ECO 40-3S/4-LSA47.2M7-SK355MS
  • Frequency/Rotation

50Hz/ 1500RPM

  • Voltage (V)
380/220, 400/230
  • Prime Power/Standby Power  (KVA)

500/550

  • Phase

3

  • Power Factor

0.8

  • Number of Pole

4

  • Electrical Issulation Class

H

  • Mechanical Protection Class

IP23

  • Voltage Variation

MECC ALTE: 0.25%, LEROYSOMER: 0.5%, SINCRO:0.25%

Controller

CONTROLLER GENPACS-7320MKII – MADE IN GERMANY

Deep Sea controller DSE7320 generator engine control 

FEATURES:

  • Controlling Generator, Auto Mains Failure (AMF) and Ready to connect to any ATS
  • Remote Control  Available
  • Recording Fault, Starts
  • Emergency Stop Button on Control Panel
  • Generator Metering by LCD: 3-phase Voltage, 3-phase Current, Frequency, Rotation, Oil Pressure, Water Temperature, Battery Voltage, Run-hour, Total Kw, Total Kwh, Power Factor.
  • Mains Metering: Frequency, Voltage.

ALARM AND PROTECTION:

  • Alarm and Shut-down: High Water Temperature, Low Oil Pressure, Over or Under Frequency/ Rotation, Over/Under AC Voltage, Over Current, Exceed Power, Short Circuit, Emergency Stop Button Pressed, Over Cranking.
  • Alarm: Charging Failure, Over/Under Battery Voltage.

Standard Accessories

  • Heavy duty Base Frame with Anti-Vibration Rubbers.
  • Fuel day tank on Base Frame
  • Exhaust silencers
  • Battery
  • MCCB (ACB on request)
  • Technical Documents.

Advantaged Features

ADVANTAGED FEATURES

  • The quality of GENPACS generator is guaranteed as the highest EU standard
  • Generator is tropicalized for operation on tropical conditions.
  • Generator is available tested at full load before delivery under ISO8528 and DIN6271.
  • Independent Test and Inspection are available on request.
  • Quality Product is controlled by ISO 9001:2008 and ready to upgrade to ISO 9001:2015.

Notes

  • Output Power is in accordance with ISO8528 at temperature up to 45ºC, humidity up to 95%.
  • Standby Power is maximum power available for the duration of any power outage at variable load. No overload is allowed.
  • Prime Power is available for continuous operation at variable load. The average output power during 24h period of operation must not exceed 80% of the Prime Power. 5% over load is allowed in 1h with every 12h of operation.